FZ-09
Yamaha FZ-09 | MT-09 Front Turn Signals (2014-2016) Instructions
Yamaha FZ-09 | MT-09 Front Turn Signals (2014-2016) Installation Instructions
1) Remove (4) screws with philips head screw driver (picture 1)
2) Inside stock blinker, pop out plastic locking tab and remove turn signal (pictures 3/4)
3) Mount new signal to plastic housing by removing philips head screw and plastic lens and mounting inside plastic housing (pictures 5/6)
4) Plug turn signals in and test connections
5) Reinstall plastic covers
6) Install LED flasher under seat
Shop The Part
New Rage Cycles
Yamaha FZ-09 | MT-09 Front Turn Signals (2014-2016)
Modules:No Thanks
Quantity:
Take your Yamaha FZ-09 | MT-09 to the next level with our DIY front turn signals. This highly popular Yamaha model was designed with a creative twist to it. Why not add to the styling with our unique and creative design?
Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in front signal replacement.
Add a Dual-Load Equalizer to stabilize the flash speed. One is not required but without, the turn signals will flash slightly faster than stock.
Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in front signal replacement.
Add a Dual-Load Equalizer to stabilize the flash speed. One is not required but without, the turn signals will flash slightly faster than stock.