Tuono V4 1100
Aprilia Tuono 1100 V4 Fender Eliminator (2015-2019) Instructions
Aprilia Tuono 1100 V4 Fender Eliminator (2015-2019) Instructions
- Remove seat and unplug stock connector
- Remove stock tail sections by removing (3) bolts and slide off bike
- Feed harness through hole in body. Take (2) black spacers, (2) M6x25 bolts, (2) nylon nuts, and mount through lower holes on fender eliminator bracket.
- Take third black spacer and M6x25 bolt and thread into frame using top hole on fender eliminator bracket.
- Adjustable license plate bracket will come tight. Loosen bolts and adjust plate to desired location.
- lug harness together and mount license plate
Shop The Part
New Rage Cycles
Aprilia Tuono 1100 V4 Fender Eliminator (2015-2019)
Quantity:
Take your Aprilia Tuono 1100 V4 to the next level with our DIY fender eliminator. NRC kit comes with LED turn signals, license plate bracket, and LED license plate light for a full LED replacement. This Tuono 1100 V4 was designed with a powerful and creative twist to it. Why not add to the styling with our unique and creative design?
Fender eliminator also comes with an adjustable license plate bracket so you can keep your plate in a standard or tucked location!
Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in fender eliminator.
Fender eliminator also comes with an adjustable license plate bracket so you can keep your plate in a standard or tucked location!
Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in fender eliminator.