R Nine T
BMW R Nine T Front Turn Signals (2014-Present) Instructions
BMW R Nine T Front Turn Signals (2014-Present) Instructions
1. Remove passenger seat using T30 torx, and then remove rider seat.
2. Remove 4 stock bolts underneath bike holding plastic shield.
3. Remove 4 stock bolts up top, removing stock fender in the process.
4. Unbolt 4 bolts holding passenger peg bracket using T40 torx.
5. Using the same T40 torx, unbolt 2 stock bolts removing brake lever / peg.
6. To remove seat frame in rear, unbolt 4 bolts using T40 torx -- two bolts on either side of bike.
7. With NRC license plate bracket / strap, bolt onto back of the bike using supplied M8 bolts.
8. Remove 2 stock bolts from backside of seat using T25 torx.
9. Bolt NRC tail light to back of the seat using M3 allen socket or key.
10. Plug in new tail light
11. Slide seat back onto bike making sure all your connections are clean and zip tied together.
Shop The Part
New Rage Cycles
BMW R Nine T Front Turn Signals (2014 - Present)
Quantity:
New Rage Cycles now sells PLUG & PLAY front turn signals for the BMW R Nine T. Remove your stock lollipop signals, and replace them with our extremely bright replacements. Our LEDs are housed inside a lens which provides you with a bar of light that is impossible to miss, but also tucks the signals closer to the bike.
Our plug & play signals save you time and money on installation, and lets you plug right in and ride on!
(2014 - Present)