BMW R Nine T Fender Eliminator Kit Instructions
1) Remove passenger seat using T30 torx, and then remove rider seat (picture 1)
2) Remove 4 stock bolts underneath bike holding plastic shield (picture 2)
3) Remove 4 stock bolts up top, removing stock fender in the process (picture 3)
Removing the passenger peg bracket is optional so only follow if you choose to do so. If passenger peg bracket is off, you will need to use seat pod in rear. If passenger peg bracket is on the bike, you may use either stock seat or seat pod.
1) Unbolt 4 bolts holding passenger peg bracket using T40 torx (picture 4)
2) Using the same T40 torx, unbolt 2 stock bolts removing brake lever / peg (picture 5)
Shop The Part
New Rage Cycles
BMW R Nine T Fender Eliminator Kit (2014 - Present)
New Rage Cycles now offers a PLUG & PLAY fender eliminator kit for the BMW R Nine T. This kit cleans up the rear end of your R Nine T with the brightest turn signals on the market. Our dual lens offers you a top tiered bright brake light strip, as well as a bottom tiered lens for incredibly bright LED turn signals.
Model years up to 2021 likely throw a code on the dash. There is nothing that can be done about this, as we have worked directly with BMW and their software locks out any solution to this. If you have a 2021 or newer model, there will be NO code!
No other fender eliminator kit exists on the market today! Works both with or without the seat pod!
Our plug & play kit saves you time and money on installation, and lets you plug right in and ride on!
(2014 - Present)