BMW S1000R/RR Front Turn Signals Instructions
1) With T30 torx, unbolt stock signal from fairing (picture 1)
2) Remove stock signal lenses with Philips head screw driver (picture 2)
3) Slide housing out and disconnect spade connectors, leav- ing wiring harness in place (picture 3)
4) Make your connections as follows, then shrink tube connec- tions: (picture 4)
• LH signal: Blue/Red Tracer NRC Red wire
• LH Signal: Brown NRC Black wire
• RH Signal: Blue/Red Tracer NRC Red wire
• RH Signal: Brown NRC Black Wire
5) Feed wires in bike and bolt on new turn signal using stock bolt (picture 5)
Shop The Part
New Rage Cycles
BMW S1000R Front Turn Signals (2021-Present)
Plug-and-play mirror block off turn signals for BMW S1000R riders is now available from New Rage Cycles.
- Brightest LED turn signals in the market
- Completely Plug & Play
- Black textured finish for professional look
- Proper flash speed; no additional modules required
Our plug & play kit saves you time and money on installation, and lets you plug right in and ride on!