S1000RR
BMW S1000RR Block Off Plates (2020-Present) Instruction
BMW S1000RR Block Off Plates (2020-Present) Instruction
1.)Remove windscreen (white arrows) then the black dash cover to expose connectors for the mirrors.
2.) Remove 2 10mm nut s (green arrows)
3.) Install spacers as shown
1/2 x 1/8 (green arrows)
3/8 x 15/32 (yellow arrows)
M5 push nuts (red arrows)
4.) MBO (green arrow)
Front turn signal (blue arrow)
M5 lock nuts (red arrow)
Shop The Part
New Rage Cycles
BMW S1000RR Block Off Plates (2020-Present)
Quantity:
BMW S1000RR mirror block off plates from New Rage Cycles is a bolt on kit that will clean up the front end of your bike completely! If you are removing your stock mirrors for NRC front signals or any aftermarket front blinker replacement, these block off plates fill the void on the front fairing.
Order these by themselves or add them to your order of our front turn signals.