Ducati 1199 Panigale Fender Eliminator Kit Installation Instructions
1) Remove front and passenger seats from bike
2) Remove four 4mm allen bolts (picture 2 & 3)
3) Lower stock turn signal and license plate bracket exposing stock connectors
4) Unplug turn signal and license plate light connectors
5) Plug in the new turn signal connectors (picture 4)
6) Slide torx bolt up through turn signal bracket and rubber grommet, loosely threading through flat washer and into nyloc nut (picture 5)
7) Remove backer off double sided tape
8) Center your turn signal bracket and tighten down on the torx bolt sandwiching your bracket with the body panel underneath. (Do not over tighten)
License Plate Bracket Install
1) Remove 2 6mm allen bolts (picture 6)
2) Slide bolts through new license plate bracket and tighten down
3) If using passenger pegs, remove 6mm allen bolts and reinstall using supplied hardware (2 bolts / 2 spacers)
4) Sandwich spacers between license plate bracket and passenger peg bracket
Shop The Part
New Rage Cycles
Ducati 1199 Panigale Fender Eliminator Kit (2011 - 2014)
Our plug & play kit saves you time and money on installation, and lets you plug right in and ride on!
Turn signal lenses are CNC machined from polycarbonate and our turn signal bracket is machined from aluminum. We use extremely bright 1mm LEDs, giving you outstanding turn signals... Day or Night!
Hardware is provided with your kit should you want to mount the passenger pegs, and our kit DOES come with a license plate light. Plug right in and ride on!
(2011 - 2014)