Ducati Diavel Rear Turn Signals Instructions
1) Remove seat from bike
2) Remove plastic panel under seat via 6 allen bolts (picture 1)
3) Unplug 2 connectors (picture 2)
4) Remove 2 tail light bolts and rubber grommets (picture 3)
5) Put rubber grommets back in and feed wires from new tail light through grommet hole (picture 4)
6) Tighten tail light bolt, feeding bolt through provided nut (picture 5)
7) Cut stock connectors off stock tail light (picture 6)
8) See Page 2 for wiring instructions
9) Reinstall plastic panel underneath seat
10) Put seat back onto bike, and Ride Safe!
Shop The Part
New Rage Cycles
Ducati Diavel V4 Rear Turn Signals (2023 - Present)
Plug-and-play rear turn signals for Ducati Diavel V4 riders is now available from New Rage Cycles.
- Brightest LED turn signals in the market
- Completely Plug & Play
- Black textured finish for professional look
- Proper flash speed; no additional modules required
Add our side mount license plate to your order if you prefer to mount your plate down on your swing arm!
Our plug & play kit saves you time and money on installation, and lets you plug right in and ride on!
(2023 - Present)