Ducati Hypermotard 821/939 Fender Eliminator Kit Instructions
1) Remove seat from bike
2) Remove 4 stock mounting bolts to remove OEM turn signals and license plate bracket (picture 1)
3) Remove stock signal connectors off wiring harness
4) Take NRC turn signal bracket and license plate, and feed 3 wires through bottom body panel (picture 2)
5) Plug new turn signals into stock wiring harness – spade connectors to license plate light
6) Take 2 of the removed stock bolts to install new fender eliminator (picture 3)
7) Before tightening all the way, center turn signal bracket, and then tighten bolts (picture 4)
8) Put seat back onto bike, and Ride Safe!
Shop The Part
New Rage Cycles
Ducati Hypermotard 939/821 Fender Eliminator Kit (2013 - 2019)
Take advantage of New Rage Cycles' exclusive fender eliminator design for the Hypermotard 939/821. You now have the option to tuck your license plate underneath the bike, or leave the plate underneath the tail light. Our design wraps completely around the entire back-end of your Hypermotard, giving a very clean turn signal / license plate replacement.
Both styles are plug & play, saving you time and money on installation, and lets you plug right in and ride on! Either style comes with LED turn signals, license plate bracket, and plate light.
Our kits are all constructed from aluminum and black powder coated for a very clean finish, as well as giving you the brightest LEDs in the market!
(2013 - 2019)