Husqvarna 701 Vitpilen Front Turn Signals Instructions
1) Remove (4) bolts above and below headlight, (2) on each side with an 8mm socket. (Picture 1/2)
2) Remove (6) T25 torx screws and remove plastic cover. (Picture 3)
3) Unplug stock connectors on both sides and remove nut on backside of stock turn signals with a 13mm wrench. (Picture 4)
4) Take NRC turn signal, and remove (4) screws above and below lens to separate from both brackets. Take provided M6x16 bolt and M5 nut and mount top bracket to the bike. Repeat on both sides. (Picture 5/6)
5) Take lens and (4) flat head screws removed in last step reassemble lens, screwing flat plate to the bottom.
6) Plug connectors together and test
7) Reassemble plastic cover and head light with stock screws.
Shop The Part
New Rage Cycles
Husqvarna Vitpilen 701 Front Turn Signals (2018 - 2022)
LED front turn signals for Husqvarna Vitpilen 701 riders is now available from New Rage Cycles.
- Brightest LED turn signals in the market
- Modern and sleek to follow lines
- Black textured finish for professional look
- Proper flash speed; no additional modules required
Our plug & play kit saves you time and money on installation, and lets you plug right in and ride on!
(2018 - 2022)