1) Remove seat and unplug grey and white connectors (Photo 1)
2) Remove fender struts with a 6mm allen key (Photo 2)
3) Behind left strut, unplug plate light connector (Photo 3)
4) Remove stock turn signals from struts using a 5mm allen key (Photo 4)
5) Install new turn signals using provided 10-32 bolts and nuts using a T25 Torx (Photo 5 and 6)
6) Reinstall fender struts
7) Plug in plate light connector and run harnesses back to factory location under seat and plug in
Shop The Part
![Indian Scout Bobber Rear Turn Signals (2018-Present)](http://newragecycles.com/cdn/shop/products/SCOUT-RTS-2.jpg?v=1644507624&width=600)
![Indian Scout Bobber Rear Turn Signals (2018-Present)](http://newragecycles.com/cdn/shop/products/SCOUT-RTS-3.jpg?v=1644507624&width=600)
![Indian Scout Bobber Rear Turn Signals (2018-Present)](http://newragecycles.com/cdn/shop/products/SCOUT-RTS-4.jpg?v=1644507624&width=600)
![Indian Scout Bobber Rear Turn Signals (2018-Present)](http://newragecycles.com/cdn/shop/products/SCOUT-RTS-5.jpg?v=1644507624&width=600)
New Rage Cycles
Indian Scout Bobber Rear Turn Signals (2018-Present)
Plug-and-play Turn Signals for Indian Scout Bobber riders is now available from New Rage Cycles.
- Brightest LED turn signals in the market
- Completely Plug & Play
- Black textured finish for professional look
- Proper flash speed; no additional modules required
Our plug & play kit saves you time and money on installation, and lets you plug right in and ride on!