Indian FTR 1200 Fender Eliminator (2019-Present) Instructions

Indian FTR 1200 Fender Eliminator (2019-Present) Instructions

1.) Remove grab handles with a T40 torx. 

2.) Remove seat bolts with a 6mm allen key. 

3.) Remove rubber plug on swim arm, slide out wiring harness and unplug.

4.) Remove hugger bolts with a 6mm allen key.

5.) Remove (4) tank strap bolts with a 12mm socket.

6.) Remove (2) tanks bolts

7.) Reroute the harness you previously unplugged on the swing arm and bring up through the frame and place underneath the seat.

8.)If you ordered the tucked version, take the provided M6 bolts and flanged nuts and mount your license plate bracket to the turn signal bracket. Then take new turn signal bracket and provided M8 hardware and mount onto the frame of the bike 

9.) Route connectors from new turn signals between the frame and tank and up underneath the seat.

10.) Plug the provided harness into the OEM harness pulled from the swing arm. Also take the turn signal and license plate connectors and plug them together. You may test everything at this point to ensure your left and right signals are correct.