Indian Scout Bobber Front Turn Signals Instructions

1) Remove stock turn signal retaining bolt using a 10mm wrench and 5mm allen key (Photo 1 and 2)

2) Unplug connectors behind headlight

3) Remove allen bolt for stock signal using a 4mm allen key. You will be reusing this bolt to mount new turn signals (Photo 3 and 4)

4) Take new signals and remove the top sheet metal cover from both sides (Photo 4)

5) Take flat cover plate and top sheet metal cover and mount onto rubber signal mount using the stock bolt and supplied M6 nut (Photo 5, 6, 7)

6) Install new turn signal by screwing to top sheet metal

7) Take rubber mount, wrap back around fork, reinstall retaining bolt, route connectors back to OEM connector and plug back in