Kawasaki Ninja 400 Fender Eliminator Instructions
1) Remove seat.
2) Remove (4) 5mm allen bolts. (Picture 1)
3) Unplug (3) stock connectors and slide off stock tail section.
4) Remove top plate from lens bracket. (Picture 2)
5) Mount NRC license plate to lens bracket with (2) M6x12 bolts and (2) M6 nylon nuts. (Picture 3/4)
6) Feed wires through previously removed top bracket and slide into place. (Picture 5)
7) Mount NRC kit onto bike with (4) M6x16 bolts and (4) M6 flange nuts. (Picture 6/7)
8) Plug in connectors and test turn signals and plate light.
9) If load equalizer was ordered to stabilize flash speed, use blue t tap connectors to install. Wire colors are on bag.
Shop The Part
New Rage Cycles
Kawasaki Ninja 400 Fender Eliminator (2018 - Present)
The 2018 Kawasaki Ninja 400 has been released, and we were ready for it!
Our fender eliminator offers you a complete LED replacement with unmistakably bright LED turn signals and license plate light.
As always, our kit is completely plug and play, easy to install, and saves you time and money on labor costs, allowing you to plug in and ride on.
(2018 - Present)