1290 Super Duke
KTM 1290 Super Duke Front Turn Signals (2014-2019) Instructions
KTM 1290 Super Duke Front Turn Signals (2014-2019) Instructions
1.) Remove T30 torx bolt from top of headlight (picture 1)
2.) Remove (3) torx bolts behind headlight. Two top bolts are T25 torx and lower bolt is T20 torx. Then pop off plastic cover (picture 2)
3.) Unplug (2) white turn signal connectors (picture 3)
4.) Each signal has (1) T25 torx bolt that needs to be removed so take off stock signals (picture 4)
5.) Take new blinker and unscrew top plate from lens (picture 5)
6.) Bolt on top plate with supplied Philips head screw and acorn nut (picture 6)
4.) Each signal has (1) T25 torx bolt that needs to be removed so take off stock signals (picture 4)
5.) Take new blinker and unscrew top plate from lens (picture 5)
6.) Bolt on top plate with supplied Philips head screw and acorn nut (picture 6)
7.) Screw on lower plate/lens (picture 7)
8.) Plug connectors into harness and test your connections before tidying up
8.) Plug connectors into harness and test your connections before tidying up
9.) Reinstall plastic shield
10.) Reinstall bolt on headlight
Shop The Part
New Rage Cycles
KTM 1290 Super Duke Front Turn Signals (2014-2019)
Quantity:
Plug-and-play LED front turn signals for KTM SuperDuke 1290 riders is now available from New Rage Cycles.
- Brightest LED turn signals in the market
- Completely Plug & Play
- Black textured finish for professional look
- Proper flash speed; no additional modules required
(2014-2019)