MV Agusta Brutale 675/800 Fender Eliminator Kit Instructions
MV Agusta Brutale 675/800 Fender Eliminator Kit Installation Instructions
1) Remove stock license plate / turn signal holder by removing 4 bolts (photo 1).
2) Cut stock plugs off license plate holder and solder onto our fender eliminator (photo 2).
• Red/white plug: Right turn signal (Blue wire > Black Wire: Black wire > Red Wire)
• Blue/white plug: Left turn signal (Red wire > Black wire: Black wire > Red wire)
• White Plug: License plate light (Yellow wire > Red Wire: Black wire > Black wire)
3) Remove 2 plastic side pods (photo 3).
4) Slide provided bolts up through the turn signal plate and through frame holes (photo 4).
5) Use provided hardware (washer / nut), but keep unit loose (photo 5).
6) Clean the surface area well with denatured alcohol or something comparable to prepare for double sided tap
7) Slide turn signal bracket up into place and tighten 2 bolts (photo 7).
8) Plug 3 factory connectors back together.
9) Reinstall side pods and seat (photo 8).
Shop The Part
New Rage Cycles
MV Agusta Brutale 675/800 Fender Eliminator Kit (2012 - 2015)
Plug & Play Fender Eliminator Kit for the MV Agusta Brutale 675 and Brutale 800. This kit completely cleans up the rear end of your Brutale! Constructed from aluminum and black powder coated for a very clean and flush finish, as well as giving you outstanding LED turn signals!
Save time on the install and more time riding with our line of plug & play accessories.
Turn signal lenses are CNC machined from polycarbonate while the bracket is machined from aluminum. We use 1 millimeter LEDs, giving you amazing turn signals... Day or Night!
Fender eliminator kit comes with a license plate light mounted to our bracket, along with LED turn signals and a license plate bracket for your license plate.
(2012 - 2015)