MV Agusta Dragster 800 Side Mount License Plate (2019-Present) Instructions

MV Agusta Dragster 800 Side Mount License Plate (2019-Present) Installation Instructions

1) Remove patch plate to expose wiring harness and unplug connectors. (Picture 1)

2) Remove (3) stock bolts on hugger to slide off bike but retain the 2 stainless hex bolts. (Picture 2)

3) With provided black standoffs and M6x12 bolt, mount new side mount onto the bike, also using the 2 stock hex bolts. (Picture 3)

4) Plug in plate light connector and test.

5) Re-install patch plate