Yamaha MT-10 Front Turn Signals Instructions

Yamaha MT-10 Front Turn Signals Installation Instructions

1) Remove pop clips and side covers to expose turn signal connectors. (Picture 1 and 2)

2) Remove (2) allen bolts and (1) pop clip from radiator side covers. (Picture 3 and 4)

3) Remove retaining clip, unplug OEM connector, and take out stock turn signal. (Picture 5)

4) Install new turn signal into opening. Tighten phillips head screw to lock in. (Picture 6)

5) Plug in connectors and test.

6) Reinstall radiator covers and side covers.