R1
Yamaha R1 Fender Eliminator Instructions
Yamaha R1 Fender Eliminator Installation Instructions
1) Remove seats off bike
2) Remove (4) screws with philips head screw driver (picture 1)
3) Unplug (3) connectors for turn signals and plate light. You can unplug tail light connector to access bolts if it makes it easier for next step
4) Remove (3) bolts using a 5mm allen key or socket (picture 2)
5) Slide out stock tail section
6) Take new blinker assembly, slide wires through hole underneath bike and with provided hardware (3x M6x25mm bolts | 3x M6 tooth washers), mount onto bike (pictures 3/4)
7) Plug connectors back into harness and test connections before putting seat back on
8) Mount your license plate
9) Put seat back on and ride safe
Shop The Part
New Rage Cycles
Yamaha R1 Fender Eliminator (2015-Present)
Quantity:
Take your Yamaha R1 to the next level with our DIY fender eliminator. NRC kit comes with LED turn signals, license plate bracket, and LED license plate light for a full LED replacement. This newly updated R1 was designed with a creative twist to it. Why not add to the styling with our unique and creative design?
Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in fender eliminator.
Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in fender eliminator.