Yamaha R6 Fender Eliminator (2017-Present) Instructions
Yamaha R6 Fender Eliminator (2017-Present) Installation Instructions
1) Remove stock seat
2) Unbolt (4) bolts to remove seat lock bracket and turn signal bracket (picture 1)
3) Unplug (2) turn signal connectors and (2) barrel connectors for plate light
4) Remove (4) bolts to slide off stock tail section (picture 2)
5) Take (2) of the provided torx bolts and mount license plate bracket (picture 3)
6) Slide all connectors through factory hole and up underneath seat.
7) Take other (2) torx bolts and mount lens bracket using the other 2 mounting holes (picture 4)
8) Tighten (4) nuts to secure new fender eliminator (picture 5)
9) Plug in all connectors and test
10) Re-install seat lock and turn signal brackets underneath seat
11) 11 Put seat back on
Shop The Part
New Rage Cycles
Yamaha R6 Fender Eliminator (2017-2023)
Take your Yamaha R6 to the next level with our DIY fender eliminator. NRC kit comes with LED turn signals, license plate bracket, and LED license plate light for a full LED replacement. This redesigned R6 was designed with a creative twist to it. Why not add to the styling with our unique and creative design?
Comes with all necessary hardware to install, and OEM connectors to make for a simple bolt-on / plug-in fender eliminator.
(2017 - 2023)